Hobby OPTIMA DE LUXE 2019 Manual Download Page 35

Page: 35 / 209

5. Exterior Structure

Do not block the refrigerator's ventilation grill so as not to

restrict cooling performance and the functions of the refrige-

rator. These winter panels are a chargeable option; they can

be ordered from your dealer.

Please also note the information on the covers. For further

information, please check the operating instructions of the

refrigerator manufacturer.

Removing the ventilation grilles during maintenance and

repair

• Push the lock

as far down as possible.

• Carefully lift open the ventilation grill on the left-hand side.

• Then pull the right-hand side out of the bracket.

Locks for ventilation grille

The ventilation grilles must be firmly mounted while driving

or when it is raining.

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands