manualshive.com logo in svg

Hobby OPTIMA DE LUXE 2019, Manual

The Hobby OPTIMA DE LUXE 2019 is a top-quality recreational vehicle designed for those seeking comfort and luxury while traveling. To make the most of its features, download the user manual for free from our website. This comprehensive manual will guide you through every aspect of your Hobby OPTIMA DE LUXE 2019 experience.

Share
Download
background image

11. Accessories 185

Chapter 12: 

Maintenance and Care

12.1 Maintenance

Maintenance intervals

There are stipulated maintenance intervals for the motor home 
and its equipment.

The following applies for maintenance intervals

•  Have the first maintenance carried out by a HOBBY dealer 

12 months after the vehicle was first registered.

•  All further maintenance should be carried out once a year 

by a HOBBY dealer.

•  The maintenance of the basic vehicle as well as all built-in 

equipment should be carried out at the intervals given in 

each operating manual.

12. Maintenance and Care

The inspection of the gas system and flues, for which a fee 

is payable, should be carried out regularly by a liquid gas 

expert in accordance with national regulations (annually in 

Great Britain). The inspection of the gas facilities (subject to 

extra cost) is to be repeated every 2 years by a liquid gas 

expert. This inspection is to be conducted and certified in 

accordance with the German Association of Gas and Water 

Experts, worksheet G 607, and EN 1949. The operator is 

responsible for scheduling this inspection.

Also note the maintenance intervals for the basic Fiat vehicle. 

Hobby’s voluntarily granted (5 year) warranty against leaks in 

the van, as set out in the guarantee conditions, will only take 

effect if the (chargeable) inspections for leaks were carried 

out correctly. To this end, the mobile home must be taken 

to a Hobby dealer 12-18 months after receipt of the vehicle. 

After the initial inspection for leaks, this inspection must 

be repeated every 12 months during the warranty period.

Hobby recommends that you contact a service partner before 

driving there and inquire whether they have the necessary 

capacity (e.g. an adequate car lift) in order to avoid any 

misunderstanding.

Replace safety regulator knobs and hoses after 10 years 

at the latest!  Note that high-pressure gas hoses must be 

replaced after 5 years.
For safety reasons, spare parts for equipment must conform 

with the manufacturer‘s instructions and must be installed 

by him or a duly authorised representative.

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Reviews:

No comments

Related manuals for OPTIMA DE LUXE 2019

Jeep Wrangler2018 Owner'S Manual preview
Wrangler2018
Brand: Jeep Pages: 608
NavLinkz CAM-N-CV133-V Manual preview
CAM-N-CV133-V
Brand: NavLinkz Pages: 4
Dakota Digital Retrotech RTX-68D-CHG Quick Start Manual preview
Retrotech RTX-68D-CHG
Brand: Dakota Digital Pages: 4
Mercedes-Benz GUARD S 500 Supplement To Operators Manual preview
GUARD S 500
Brand: Mercedes-Benz Pages: 30
Farad BARS PR25 - 2 Quick Start Manual preview
BARS PR25 - 2
Brand: Farad Pages: 8
Waeco MagicComfort MSH200 Installation And Operating Instructions Manual preview
MagicComfort MSH200
Brand: Waeco Pages: 108
Tusk RL-HM018R Installation Instructions And Information Manual preview
RL-HM018R
Brand: Tusk Pages: 2
Subaru Impreza 2.5GT Specifications preview
Impreza 2.5GT
Brand: Subaru Pages: 2
Subaru 1999 Impreza Owner'S Manual preview
1999 Impreza
Brand: Subaru Pages: 328
Car-Systems Parktronic system Volkswagen Golf MK7 Assembly Manual preview
Parktronic system Volkswagen Golf MK7
Brand: Car-Systems Pages: 10
National Cycle Quantum Wash'n'Wipe N30208 Assembly Instructions And Owner'S Manual preview
Quantum Wash'n'Wipe N30208
Brand: National Cycle Pages: 12
Ford Escape 2022 Owner'S Manual preview
Escape 2022
Brand: Ford Pages: 585
OMNISTOR Omni-Bike Sport Ducato Installation preview
Omni-Bike Sport Ducato
Brand: OMNISTOR Pages: 5
Westin 32-1660 Instructions preview
32-1660
Brand: Westin Pages: 3
Rugged Ridge 13551.33 Manual preview
13551.33
Brand: Rugged Ridge Pages: 3
Buick Automobille 2004 Century Getting To Know Manual preview
Automobille 2004 Century
Brand: Buick Pages: 12
Thule Follow me RAPID INTRACKER Fitting Instructions Manual preview
Follow me RAPID INTRACKER
Brand: Thule Pages: 8
GEMINI TECHNOLOGY 514F User Manual preview
514F
Brand: GEMINI TECHNOLOGY Pages: 9

Brands by name

Popular brands

Load more brands