Hobby OPTIMA DE LUXE 2019 Manual Download Page 176

Page: 176 / 209

10. Built-in devices 175

Absorber refrigerator

If the external temperature is high, full refrigerating capacity can

only be ensured by means of sufficient ventilation. To achieve

better ventilation, ensure that the side of the mobile home with the

refrigerator ventilation grids stands in the shade (

see Chapter 5.1

Absorber Kühlschrank

While driving, the refrigerator door must always be closed

and locked.

Refrigerator door lock

Refrigerator door lock: ventilation position

If not in use for a longer period of time, the refrigerator should

be switched to the ventilation position to prevent bad odours.

The illustration above shows the correct ventilation position.

Opening

• Turn the lock

to the side as far as it will go until the

refrigerator door can be opened.

Closing

• Shut the refrigerator door and then turn the lock

back

to its original position.

Environmental conditions influence the performance of the

refrigeration unit. The system reacts sluggishly to changes in

the thermostat regulator, loss of cold when opening the door

or storing goods. Use the winter cover if the temperature is

below +10°C (Dometic accessory).

If the temperature stays above +32°C, an additional fan

(Dometic accessory) should be installed.
Turn on the refrigerator at least 12 hours before putting

anything in it.

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands