Hobby OPTIMA DE LUXE 2019 Manual Download Page 17

Page: 17 / 209

2. Safety

Refuelling

A number of devices that use an open flame have been built

into your van.

The following applies when refuelling:

• Switch off all gas appliances (heating, cooker, absorber re

frigerator

(when operating on gas), etc.)!

• Turn off all mobile phones!

• Never get anything other than diesel fuel.

• Never mistakenly fill the fresh water tank with fuel.

Reversing/Manoeuvring

Your van is far larger than a car.
The following applies to reversing/manoeuvring

• Even if the wing mirrors are correctly adjusted there is a

significant blind spot.

• When reversing or parking in places with poor visibility get

help to guide you in.

Braking

A van has a different brake response than that of a car. For this

reason, inexperienced drivers in particular should carry out

several test braking manoeuvres in a suitable location before

driving on the road. The braking distance of the van is longer

than that of a car. Furthermore, it is strongly influenced by how

heavily the van has been loaded.

The following applies for braking

• Note the longer braking distance, especially on wet roads.

• When driving down a mountain, do not select a gear that is

higher than the one used when driving up a mountain.

Driving economically

The engine of your van has not been designed to drive con-

stantly under a full load.

The following applies when driving

• Do not keep your foot down on the accelerator!

• The final 20 km/h before reaching top speed require up to

50 % more fuel!

Should there be any defects or malfunctions in the driving

performance of the van, please notify roadside assistance

and have any maintenance and repair work carried out by

an authorised specialist.

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands