Hobby OPTIMA DE LUXE 2019 Manual Download Page 18

Page: 18 / 209

2. Safety 17

2.7 After driving

Selecting a parking space

The following applies for selecting a parking space

• If possible, pick your spot in daylight.

• Select a parking space that is as level as possible.

• Use the front step as a control point to check that your van

is standing in a horizontal position (important to ensure

that the absorber refrigerator

functions correctly).

• On uneven ground or slopes, compensate for any incline

by using ramps or leveling blocks underneath the wheels.

Pitching or siting vehicle

The following applies when pitching or siting the vehicle

• Put the vehicle in gear.

• Pull on the handbrake.
• If necessary, use blocks (not in scope of delivery).

Should the temperature be around 0° C or less, only pull

lightly on the hand brake and always leave in gear so that

the hand brake does not freeze!

hen turning the driver‘ seat, ensure that you do not

accidently disengage the handbrake.

Switching to mains hook up

The following applies when when to mains hook up

• Open the main stop valve on the gas bottle and the gas

stop valve on the appliance required.

• If necessary, switch the refrigerator from 12V to gas or

230V because the 12V supply will automatically be swit

ched off after a brief period of time when the van's engine

is not running (applies only for absorber refrigerator*).

Water installation

Water left standing in the fresh water tank or the pipes quickly

becomes undrinkable.

Therefore, check the water pipes and the fresh water tank be-

fore each journey to ensure they are clean. Disinfect and rinse

the drinking water system regularly, and always before each

journey.

Please empty any residual water from the water tank

before filling it with fresh water.

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands