Hobby OPTIMA DE LUXE 2019 Manual Download Page 47

Page: 47 / 209

6. Interior Structure

Chapter 6: Interior Structure

6.1 Opening and closing doors and drawers

Handle with locking mechanism

(Vantana Premium)

Opening

• Press the pushbutton

to unlock the flap/drawer.

• Pull on the handle until the door opens.

Closing

• Use the handle to close the door/drawer until it shuts and

noticeably locks itself into place. Should this not be the

case, the door must be locked by hand.

Store only light objects in the upper stowage cabinets.

Furniture doors with a locking mechanism

Handle with locking mechanism

Please observe the maximum load of 15 kg per

drawer.

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands