Hobby OPTIMA DE LUXE 2019 Manual Download Page 54

Page: 54 / 209

6. Interior Structure 53

To convert beds

• Place the crossbeams

in the notches provided for

this purpose so that the slatted frames

have optimal

support.

• Then lower the two slatted frames

onto the crossbeams.

Position of the crossbeams, slatted frames and

extension board

• Place the extension board

between the two slatted

frames.

There is a bar on the back of the extension board to ensu-

re that the board does not slip. Place it against the step so

that it lies in the direction of the front of the vehicle.

Positioning the extension board

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands