Hobby OPTIMA DE LUXE 2019 Manual Download Page 143

Page: 143 / 209

8. Water

142

• Pull out the tank as far as possible, keeping it level.

• Slightly tip the waste tank and then pull it out completely.

• Set the waste tank in an upright position, turn the spout to

the top and open it.

• Fill the waste tank with the correct amount of toilet fluids.

• Then add enough water to completely cover the bottom of

the waste tank (approx. 3 liters).

• Shut the spout and turn it back to its original position.

Use toilet fluids very sparingly. An overdose is no guaran-

tee of preventing possible odours!

• Push the waste tank back into position.

• Ensure that the holding bar secures the waste tank.

• Close the service flap.

Never add sanitary liquids directly through the valve or into

the toilet bowl, because this may damage the washer of the

valve in the waste tank.

Always add liquids by pouring them through the spout.

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands