Hobby OPTIMA DE LUXE 2019 Manual Download Page 63

Page: 63 / 209

6. Interior Structure

• This roof light can be opened in the opposite direction to

traffic. Press the lock button

and use the adjusting

lever to move the roof light to the desired position.

Closing

• Guide the adjusting handle along the guide rail and close

the roof light. The top will lock when the lever hooks into

place behind the lock button

Opening

6.8 Skylight

Safety instructions

• Never open the skylight in strong winds/rain/hail, etc.

or if the temperature outside is below -20°C!

• Never use force to open roof lights when there is frost

or snow as the hinges and opening mechanism might

break.

• Remove snow, ice or excessive dirt before opening.

Ensure there is sufficient room before opening the

skylight under trees, in garages, etc.

• Do not stand on the skylight.

• Close and lock the skylight before driving. Open the fly

screen and the folding blind (resting position).

• If the sunlight is very strong, pull the blind only 3/4 clo-

sed, otherwise there is a danger of heat build-up.

The vents for ventilation must always remain open! Never

close or cover up these vents!

Large roof light

Control pin

Fly screens and blinds (plissés)

Both blinds are fully adjustable by sliding them horizontally

from side to side.

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands