Hobby OPTIMA DE LUXE 2019 Manual Download Page 43

Page: 43 / 209

5. Exterior Structure

To open

• Press the switch

in the entrance area.

The entrance step

will be extended automatically.

To close

• Press the switch

in the entrance area.

The entrance step

will be retracted automatically.

Retracted entrance step

Make sure that when you press the switch you are not

standing in the way of the entrance step as it is

extended.

You could be seriously injured! Alternately make sure

that nobody is standing on the step as it is retracted.

5.3 Entrance step

The vans are equipped with an electrically extendable entran

ce step

(optional for Vantana ONTOUR).

Mind the different heights of the steps and ensure that the ground

in front of the entrance is firm and level. Following a short delay

after the motor is started, the step is automatically retracted.

Do not step on the entrance step

until it has been com-

pletely extended!
An installation box has been used to mount the entrance

step

underneath the floor of the vehicle. However, this

limits the ground clearance of the van and, under unfortunate

circumstances, may cause the vehicle to hit the ground. The-

refore, your van is not suitable for driving over rough terrain.

Extended entrance step

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands