Hobby OPTIMA DE LUXE 2019 Manual Download Page 142

Page: 142 / 209

8. Water 141

Waste water tank

The waste water tank is integrated in the chassis; it is insulated.

Optional

After the electric waste water tank heating system has been

switched on on the control panel, the tank is heated by a hea-

ting cartridge. This prevents the waste water from freezing in a

light frost

(please refer also to the description on p. 77)

Do a small quantity of antifreeze agent (e.g. table salt) to

the waste water tank if temperatures are significantly below

freezing to prevent the waste water from freezing.

The waste water tank is not sufficiently protected against

damage from frost when the vehicle is not in use. Therefore,

if there is any danger of sub-zero temperatures empty the

waste water tank completely.

Never pour boiling water down the sink. This can cause

distortions and leaks in the waste water system.

Use the control panel to check the amount of water in the

waste water tank.

8.3 Toilet

The pivoting toilette consists of two parts: a fixed toilette and

a removable waste tank. Before the toilet can be used, the

waste tank must first be prepared as described below and then

returned to its original position.

The waste tank can only be removed when the drain

valve is closed.

Preparing the waste tank

• Open the Thetford door (see 5.2 Toilet flap) and pull the

holding bar up to remove the waste tank.

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands