Hobby OPTIMA DE LUXE 2019 Manual Download Page 148

Page: 148 / 209

9. Gas 147

Before initial operation

• The waste gas pipe must be tightly connected to the hea

ting and chimney without any leaks. It may not be damaged.

• Keep vents clear.

• Remove any snow from the chimney.

• Clear aspirating openings for combustion air in the side all

from dirt and/or snow. Otherwise, the exhaust fumes could

have a CO content higher than allowed.

• Do not close the safety vents.

• We recommend that you store a Type ABC powder fire ex

tinguisher with a minimum capacity of 1 kg by the entrance

door as well as a fire blanket next to the cooker. Familiarize

yourself with the safety precautions against fire that have

been set up on the grounds where you are parked.

(see also Fire protection, Chapter 2.3).

Read the manufacturer’s operating manuals carefully!

Never use portable cooking or heating devices. The only

exception are electrical heating devices (note their power

consumption) - but not radiant heaters, because they con

stitute a fire and suffocation hazard.

9.2 Gas supply

The van is equipped with a liquid gas system (gas bottle not

included in scope of delivery). This system is used to run the

following equipment:

- Cooker

- Heating

- Hot water boiler

- Possibly special accessories

- Possibly the absorber refrigerator

Safety instructions in gas bottle container

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands