Hobby OPTIMA DE LUXE 2019 Manual Download Page 50

Page: 50 / 209

6. Interior Structure 49

6.2 TV mount

230 V sockets and the aerial connection for the TV and the re-

ceiver are located directly next to where a bracket is fitted for

the TV (model-specific location).

Slide out bracket for flat screen TV

• To unlock, press the metal rail

and, at the same time,

extend the TV mount.

• To retract the mount, push it back to its original position

until it is noticeably locked into place.

Lock the media unit or TV bracket before driving.
The mounted TV must not weigh more than 8 kg. When

driving, we recommend that you remove the TV from the

bracket and store it securely.

Slide out flat screen

Please measure the installation dimensions of your van be-

fore you buy or install a television.

The measurements depend on the model and optional

extras.

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands