manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 12

Intended audience

This document is intended for system administrators, Hitachi Data Systems

representatives, and authorized service providers who install, configure, and

operate the Hitachi RAID storage systems.

Readers of this document should be familiar with the following:

•

Data processing and RAID storage systems and their basic functions.

•

The Hitachi RAID storage system and the manual for the storage system

(for example, 

Hardware Guide

, 

Hitachi Virtual Storage Platform User and

Reference Guide

).

•

The management software for the storage system (for example, Hitachi

Command Suite, Hitachi Device Manager - Storage Navigator) and the

applicable user manuals (for example, 

Hitachi Command Suite User

Guide

, 

System Administrator Guide

, 

Hitachi Storage Navigator User

Guide

).

•

The host systems attached to the Hitachi RAID storage systems.

Product version

This document revision applies to Command Control Interface software

version 01-41-03/

xx

 or later.

Release notes

The CCI release notes are available on Hitachi Data Systems Support

Connect: 

https://knowledge.hds.com/Documents

. Read the release notes

before installing and using this product. They may contain requirements or

restrictions that are not fully described in this document or updates or

corrections to this document.

Changes in this revision

•

Added instructions for configuring iSCSI virtual ports (

Setting an iSCSI

virtual port on page 5-44

, 

Deleting an iSCSI virtual port on page 5-44

).

•

Added information about the raidcom get quorum, raidcom modify

quorum, and raidcom replace quorum commands (

Commands executed

depending on operation authorities on page 3-13

, 

Operation target for

raidcom commands when specifying the virtual storage machine in

HORCM_VCMD on page 3-61

).

•

Added information about creating external volumes using iSCSI (

Creating

external volumes (iSCSI) on page 5-47

).

•

Added information about moving a parity group by specifying the LDEV

numbers of virtual volumes of Dynamic Provisioning, Copy-on-Write

Snapshot, or Thin Image (

Moving parity groups on page 5-54

).

•

Updated the error code tables.

xii

Preface

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands