Hitachi HUS VM User And Reference Manual Download Page 243

Page: 243 / 530

•

Table 6-5 Pair status versus ShadowImage commands on page 6-22

shows the relationship between pair status and ShadowImage command

acceptance.

•

Table 6-6 Pair status versus Copy-on-Write Snapshot commands on page

6-24

shows the relationship between pair status and Copy-on-Write

Snapshot command acceptance.

For details on pair status of TrueCopy for Mainframe, ShadowImage for

Mainframe, and Universal Replicator for Mainframe, see

Pair operations with

mainframe volumes on page 3-49

Table 6-2 TrueCopy and ShadowImage pair status

Statu

TrueCopy Pair Status

ShadowImage Pair Status

Primary

Secondary

SMPL

Unpaired volume

R/W

enabled

R/W

enabled

PAIR

Paired volume. Initial copy is

complete. Updates are processed

synchronously or asynchronously.

Paired volume. Initial copy is

complete. Updates are processed

asynchronously.

R/W

enabled

R enabled

COPY

In paired state, but initial copy,

pairsplit, or resync operation is

not complete. Includes

COPY(PD), COPY(SP), and

COPY(RS) status.

In paired state, but initial copy,

pairsplit, or resync operation is

not complete. Includes

COPY(PD), COPY(SP), and

COPY(RS) status.

R/W

enabled

R enabled

RCPY

Not used for TrueCopy

In paired state, but reverse

resync operation is not complete.

Includes COPY(RS-R) status.

R enabled

PSUS

(split)

SSUS

(split)

In paired state, but updates to

the S-VOL data are suspended

due to user-requested pairsplit.

The RAID storage system keeps

track of P-VOL and S-VOL

updates while the pair is split.

In paired state, but updates to

the S-VOL data are suspended

due to user-requested pairsplit.

The RAID storage system keeps

track of P-VOL and S-VOL

updates while the pair is split.

R/W

enabled

R/W

enabled

when using

write enable

pairsplit

option

PSUE

(error)

PFUS

In paired state, but updates to

the S-VOL data are suspended

due to an error condition. (PSUE

is PSUS due to internal error.

PFUS is PSUS due to sidefile full.)

In paired state, but updates to

the S-VOL volume data are

suspended due to an error

condition. When a PSUE pair is

resynchronized, the RAID storage

system copies the entire P-VOL to

the S-VOL (same as initial copy).

R/W

enabled if

no error

occurs in

the primary

volume

R enabled

PDUB

Used only for TrueCopy LUSE

pairs. In paired state, but

updates to one or more LDEVs

within the LUSE pair are

suspended due to an error

condition.

Not used for ShadowImage

R/W

enabled if

no error

occurs in

the primary

volume

R enabled

Data replication operations with CCI

6-19

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Search results

Summary of Contents for HUS VM

Reviews:

Brands by name

Popular brands

Hitachi HUS VM, User And Reference Manual

Search results

Summary of Contents for HUS VM

Reviews:

Brands by name

Popular brands