manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 267

Command:

Pair Creation

Pair Splitting

Pairing Status CC:

-m cc

Simplex -S

(2) COPY

Acceptable

Accepted (1)

(3) PSUS

Rejected

Accepted (1)

(4) PSUE PDUB

Rejected

Accepted (1)

Legend:

Accepted: A command is accepted and executed. When the command execution

succeeds, the status changes to that of the shown number.
Accepted: A command is accepted and executed. When the command execution

succeeds, the status changes to that of the shown number.
Acceptable: No operation is executed, though a command is accepted.
Rejected: Command execution is rejected and the operation terminates abnormally.
Other commands and options (for example, pairresync…) for operating a paired volume

are rejected.
The "-m cc" option cannot be specified with "-split" option in the same command.

Restrictions for Volume Migration

Volume Migration must be used within the following restrictions:

•

ShadowImage (HOMRCF).

 The operation for the volume migration

must be operated at the "SMPL" or "PAIR" or "COPY" state. If not,

paircreate -m cc

 command is rejected with EX_CMDRJE or EX_CMDIOE.

Also ShadowImage cannot be operated to CC_SVOL moving in Volume

Migration. In copying CC_SVOL, the copy operation for the volume

migration is stopped, if the ShadowImage 

pairsplit

 command is

executed.

•

TrueCopy (HORC).

 The operation for the volume migration must be

performed at the "SMPL" or "PSUS" state. If not, 

paircreate -m cc

command is rejected with EX_CMDRJE or EX_CMDIOE. Also HORC cannot

be operated to CC_SVOL copying in Volume Migration. On one hand, in

copying CC_SVOL, the copy operation for the volume migration is

stopped, if 

pairresync

 command for of HORC is executed.

Data replication operations with CCI

6-43

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands