manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 157

Figure 5-1 Synchronous and asynchronous command processing

The processing difference between these two command types are described

in 

Synchronous command processing on page 5-3

 and 

Asynchronous

command processing on page 5-3

.

Synchronous command processing

In addition to the replication commands, the process is executed by

synchronizing with a command execution, and then returning a response

after the processing is completed. When an error occurs, the error is returned

to CCI at each occurrence.

Asynchronous command processing

When an asynchronous command is executed, the command is received at

the storage system, and a response is returned before the processing is

executed. The actual processing is executed asynchronously with command

input.

The completion of the asynchronous command processing can be checked

with the 

raidcom get command_status

 command. When you execute the

raidcom get command_status

 command after executing an asynchronous

command, the 

raidcom get command_status

 command is terminated after

all asynchronous command processing has been completed.

Errors during asynchronous command processing

When an error occurs during asynchronous command processing, the error

information, such as the total number of errors or error code (SSB1 and

SSB2), is provided. After executing the asynchronous command, execute the

raidcom get command_status

 command to check the error information if the

asynchronous command processing completed normally.

Error codes SSB1 and SSB2 are stored only at the first error occurrence. For

the second and subsequent occurrences, only the number of the error

occurrence is stored with no error code. Therefore, before executing an

Provisioning operations with CCI

5-3

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands