manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 261

Controlling Volume Migration

Volume Migration, including external volumes, must be controlled using CLI in

a Data Lifecycle Management (DLCM) solution. It is possible to support

volume migration (Volume Migration function) and the external connection by

operating the current ShadowImage and VDEV mapping of the external

connection.

Also, it is important to consider the support of Volume Migration on the

compatibility based on the current CLI interface, because CCI is supporting

ShadowImage and the external connection. For this purpose, CCI makes the

CLI interface that works by minimum compatible of the application by

specifying the COPY mode for Volume Migration to the CLI of CCI.

Specifications for Volume Migration

CCI must be mapped to the port for pooling of RAID in order to control the

volume of the external connection. Therefore, the external volume needs to

be mapped previously to the RAID port without connecting to the host.

Following is an execution example of the volume migration executed for

LDEV#18.

Figure 6-14 Volume Migration configurations

(1) Command specification

CCI operates the volume migration by specifying to the horcm*.conf as same

SI and TC, because the volume migration using CCI is necessary to be

defined the mapping for the target volume.

MU# (of SMPL as SI) that is not used because SI is used for Volume Migration

operation.

An original volume for the migration is defined as P-VOL. A target volume for

the migration is defined as S-VOL. In other words, an original volume is

Data replication operations with CCI

6-37

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands