Hitachi HUS VM User And Reference Manual Download Page 341

Page: 341 / 530

Error

code

Error

message

Condition

Recommended action

Returne

d Value

•

The attribute of the port is not

Target (TAR) or RCU Target (RCU).

•

LUN security is invalid.

•

The specified host group is not

installed.

•

The specified virtual port ID is not

correct.

EX_EPPE

Permissio

n denied

with the

privilege

The specified command

device does not have an

authority to execute this

command.

Check the operation authentication.

203

EX_ENQC

Unmatche

d CLPR

with JNL

and

Volume

The specified command

device does not have an

authority to execute this

command.

Check the operation authentication.

204

EX_CTXC

Context

check

error

An error is detected by the

Context Checking.

Check if the operation by the command

executes a proper procedures and has

the consistency or not.

199

EX_EACC

Access

denied

with

Lock/

Unlock

The resource that you

specified to lock or unlock

has already been used by

another user.

Check if the specified resource is used

by such as Storage Navigator or Device

Manager - Storage Navigator or not.

200

EX_ENAU

Authentic

ation

failed

with User

User authentication failed at

the authentication command

device.

Check the user ID and password.

202

EW_INVA

Invalid

argument

Invalid option or an

argument of the option.

User -h option to check the correct

option, and specify it.

253

EW_INVO

Invalid

option

argument

Invalid argument of an

option

Use -h option to check the correct

option and use it.

131

EW_INVO

Invalid

option

Invalid option.

Use -h option to check the correct

option and use it.

131

EW_LNG

ARG

Argument

too long

The number of character for

action, object, option or

argument of option exceeded

the maximum.

Specify the number of characters of

action, object, option, an argument of

option, or the total number of

characters are to be appropriate number

of characters.

131

EW_MAX

ARG

Maximum

argument

The total number of option

or the argument of option

exceeded the maximum.

Check the total number of option or

argument of option.

131

EW_ENFI

No such

file

The specified file dies not

exist.

Check if the specified file exist or not,

and specify the correct file.

131

Troubleshooting

9-17

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Search results

Summary of Contents for HUS VM

Reviews:

Brands by name

Popular brands

Hitachi HUS VM, User And Reference Manual

Search results

Summary of Contents for HUS VM

Reviews:

Brands by name

Popular brands