Hitachi HUS VM User And Reference Manual Download Page 333

Page: 333 / 530

Error

code

Error

message

Condition

Recommended action

Returne

d Value

EX_ATTD

Can't be

attached

to a

Debug

layer

Failed to communicate with

HORCM, or cannot make a

log directory file.

Verify that HORCM is running by using

UNIX commands [ps - ef | grep horcm].

250

EX_INVN

Invalid

name of

option

The name specified in an

argument of an option is not

appropriate.

Please designate the correct name using

the -h option.

249

EX_OPTI

specified

option is

invalid

Detected contradiction in

information that RAID

reported.

Contact Hitachi Data Systems customer

support.

248

EX_ENOE

No such

device or

group

The designated device or

group name does not exist in

the configuration definition

file.

Verify the device or group name and

add it to the configuration definition file

of the remote and local hosts.

247

EX_ENOD

No such

device

The designated device name

does not exist in the

configuration definition file.

Verify the device name and add it to the

configuration definition file of the

remote and local hosts.

246

EX_ENOU

No such

RAID unit

The designated RAID unit ID

does not exist in the

configuration definition file.

Verify the RAID unit ID and add it to the

configuration definition file of the

remote and local hosts.

219

EX_ENQS

Unmatche

d Serial#

vs RAID

unitID

The group designated by

ShadowImage paircreate

does not have the same

RAID unit, or the unitID is

not identical to the unit ID in

the same RAID serial#

(Seq#).

Confirm the serial# (Seq#) of the

storage system using the

pairdisplay

command, or confirm that the serial#

(Seq#) and the unit ID of storage

system are the same among hosts using

the

raidqry -r

command.

218

EX_ENOM

Not

enough

core

Insufficient memory exists.

Increase the virtual memory capacity of

the system, or close any unnecessary

programs and/or daemon processes.

245

EW_ENES

Cannot

execute

script file

The script file specified by

the -zt option cannot be

performed.

Confirm the execution right, permission

the extension, the execution path of the

script file.

131

EX_ERAN

Result too

large

Your entry is one of the

following statuses.
•

The value was entered

beyond the maximum.

•

The result value is

beyond the maximum.

•

The unit you set is

invalid.

Refer to the error message, and

designate an appropriate value or

confirm whether you specified the unit

correctly.

244

EX_ENAM

File name

too long

Undefined error.

Contact Hitachi Data Systems customer

support.

243

Troubleshooting

9-9

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Search results

Summary of Contents for HUS VM

Reviews:

Brands by name

Popular brands

Hitachi HUS VM, User And Reference Manual

Search results

Summary of Contents for HUS VM

Reviews:

Brands by name

Popular brands