manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 119

¢

Creating a device group configured of simplex volumes with same

device names.

LDEV addition to device group

Adding an LDEV to the device group by specifying a created device group

name and the LDEV ID of the LDEV to be added.

•

Use Cases
The following shows use cases that can be added an LDEV to a device

group.

¢

Adding an LDEV (simplex volume) with a different device name to a

device group.

¢

Adding an LDEV (paired volume) with a different device name to a

device group.

¢

Adding an LDEV to a device group already including the same device

name.
The device name can be duplicated in the case of not creating the

copy group by specifying a device group.

LDEV deletion from device group

Deleting an LDEV from the device group by specifying a created device group

name and an LDEV ID of the LDEV to be deleted.

CCI functions

3-41

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands