manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 156

About provisioning operations

You can use CCI to perform provisioning operations on the following storage

systems:

•

Hitachi Virtual Storage Platform G200, G400, G600, G800

•

Hitachi Virtual Storage Platform F400, F600, F800

•

xHitachi Virtual Storage Platform G1000, G1500, and Hitachi Virtual

Storage Platform F1500

•

Hitachi Virtual Storage Platform

•

Hitachi Unified Storage VM

For details about the provisioning operations, see the 

Provisioning Guide

 for

the storage system.

Note:

 Be aware of the following when performing provisioning operations

using CCI:

•

When you execute provisioning operations using CCI, the operation of

refreshing the window (Device Manager - Storage Navigator, SVP, GUM)

might be delayed.

•

During maintenance work on the storage system (Device Manager -

Storage Navigator, maintenance utility, or Maintenance PC in modify

mode), or when the configuration is being changed from the GUI, the CCI

provisioning command might be rejected (2E10, 8000).

•

When you execute commands for provisioning operations, host I/O

performance might deteriorate because of increased working ratio of

processor by updating processing of the configuration information of

storage system. If you plan to execute many commands, take account of

the impact on the I/O performance.

Overview of the configuration setting command

CCI functions enable provisioning operations such as host setting, LDEV

creation, and device group creation. These operations are performed using

the 

raidcom

 configuration setting command.

The configuration setting command is specified using the following syntax:

raidcom <action> <resource> <parameter>

The operation itself, such as add or delete, is specified in the action, and the

resource object, such as LDEV or path, is specified in the resource. The

necessary value to operate the resource object is specified in the parameter.

For the details about the 

raidcom

 configuration setting command, see the

Command Control Interface Command Reference

.

Because some provisioning operations can take time to process, CCI provides

two ways to execute the configuration setting command: synchronously or

asynchronously.

5-2

Provisioning operations with CCI

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands