manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 339

Error

code

Error

message

Condition

Recommended action

Returne

d Value

2. Find the configuration definition

file in which the name of the

consistency group to which the pair

is added is written at 

dev_group

.

3. Add the device to the 

dev_group

in the configuration definition file

found at step 2 which matches the

consistency group to which the pair

is added (add P-VOL and S-VOL

which configures the pair to be

added).
4. Restart the HORCM instance

which matches the configuration

definition file found at step 2,

reflecting the editing results of the

configuration definition file.
5. Execute the 

paircreate

command specifying the 

dev_group

name of the consistency group to

which the pair is added by the

HORCM instance which matches the

configuration definition file found at

step 2 as follows.
In case of TC, UR, or GAD:

paircreate -g <dev_group name>
-f[g] <fence> [CTGID]

In case of SI:

paircreate -g <dev_group name>
-m grp [CTGID]

Confirm the CTG ID of the existing

consistency group by 

pairvolchk

command.
When the 

-fg

 option is specified

and 

CTGID

 is omitted in the

paircreate

 command, unused CTG

ID is set automatically.

EX_EXTC

TG

Extended

CT group

across

RAIDs

A TrueCopy, Universal

Replicator, global-active

device, or ShadowImage

volume is defined in the

configuration definition file

(HORCM_CONF) as a group

that extends across storage

systems.

Please confirm the serial # of the

volumes by using the 

pairdisplay

command to verify that the consistency

group is contained completely within

one RAID storage system.

216

EX_ENXC

TG

No CT

groups

left for

OPEN Vol

use.

An available consistency

group for OPEN Volume does

not exist.

Please confirm whether all consistency

groups are already used by mainframe

volumes.

215

Troubleshooting

9-15

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands