manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 330

Items

Notes and restrictions

(secondary) volumes. Alternate path using Path Manager (Safe

Path) is limited to primary volumes.

horctakeover

(Swap-Takeover)

When executing 

horctakeover

 on a standby server manually, I/O

on the active server must be stopped. When the package software

goes for a standby server a failover by HA software, the HA

software must guarantee an I/O insulation of the active server.

HORCM failure to

activate

After a new system has been constructed, a failure to activate

HORCM might occur due to improper environment setting and/or

configuration definition. Refer to the HORCM activation log, and

correct the settings.

Abnormal

termination of

command

Refer to the command log file and HORCM log file to identify the

cause of the error. If a command terminates abnormally because of

a remote server failure, recover the server from the failure, then re-

execute the command. If HORCM has shut down, restart HORCM. If

an unrecoverable error occurs, obtain the log files and contact

Hitachi Data Systems customer support.

Error in paired

volume operation

TrueCopy only: If an error occurs in duplicated writing in paired

volumes (that is, pair suspension), the server software using the

volumes might detect the error by means of the fence level of the

paired volume. In such a case, check the error notification

command or syslog file to identify a failed paired volume.
The system administrator can confirm that duplicated writing in a

paired volume is suspended due to a failure and the system runs in

regressed state using the error notification command of the

TrueCopy. HORCM monitors failures in paired volumes at regular

intervals. When it detects a failure, it outputs it to the host's syslog

file. Thus, the system administrator can detect the failure by

checking the syslog file. Concerning the operation of the RAID

storage system, the failure can also be found on Storage Navigator

(or SVP) provided.
Issue the TrueCopy commands manually to the identified failed

paired volume to try to recover it. If the secondary volume is

proved to be the failed volume, issue the pair resynchronization

command to recover it. If the primary volume fails, delete the

paired volume (pair splitting simplex) and use the secondary

volume as the substitute volume.

About "/

HORCM/.uds"

directory

CCI uses "/HORCM/.uds" as the directory for the UNIX domain

socket for IPC (Inter Process Communication), and makes the

directory and files as "/HORCM/.uds/.lcm*" in CCI version

01-17-03/01 or later.
Caution: This "/HORCM/.uds/.lcm*" should not be removed while

HORCM is running.

Error messages and error codes

System log messages

The following table lists and describes the HORCM system log messages and

provides recommended actions for resolving the error conditions.

9-6

Troubleshooting

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands