Hitachi HUS VM User And Reference Manual Download Page 55

Page: 55 / 530

logical volume names described in this item must also be known to the

remote server.

•

dev_group: This parameter is the same as HORCM_DEV parameter.

•

dev_name: This parameter is the same as HORCM_DEV parameter.

•

MU#: This parameter is the same as HORCM_DEV parameter.

•

Serial#: This parameter is used to specify the serial number of RAID box.

For VSP G1000, G1500, and VSP F1500, add a “3” at the beginning of the

serial number. For example, for serial number 12345, enter 312345.

•

CU:LDEV(LDEV#): This parameter is used to describe the LDEV number in

the RAID storage system and supports three types of format as LDEV#.

#dev_group dev_name Serial# CU:LDEV(LDEV#) MU#

oradb dev1 30095 02:40 0

oradb dev2 30095 02:41 0

Specifying "CU:LDEV" in hex.
Example for LDEV# 260:
01:04

Specifying "LDEV" in decimal used by the CCI inqraid command.
Example for LDEV# 260:
260

Specifying "LDEV" in hex used by the CCI inqraid command.
Example for LDEV# 260:
0x104

Note:

The HORCM_LDEV format can only be used on the TagmaStore

USP/TagmaStore NSC. LDEV# will be converted to "Port#, Targ#,

Lun#" mapping to this LDEV internally, because the RAID storage

system needs to specify "Port#, Targ#, Lun#" for the target device.

This feature is TagmaStore USP/TagmaStore NSC microcode

dependent; if HORCM fails to start, HORCM_DEV needs to be used.

HORCM_LDEVG

The HORCM_LDEVG parameter defines the device group information that the

CCI instance reads. For details about device group, see

LDEV grouping

function on page 3-35

The following values are defined.

•

Copy group: specifies a name of copy group. This is equivalent to the

dev_group of HORCM_DEV and HORCM_LDEV parameters.
CCI operates by using the information defined here.

•

ldev_group: Specifies a name of device group that the CCI instance

reads.

•

Serial#: Specifies a storage system serial number. For VSP G1000,

G1500, and VSP F1500, add a “3” at the beginning of the serial number.

For example, for serial number 12345, enter 312345.

CCI software environment

2-27

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Search results

Summary of Contents for HUS VM

Reviews:

Brands by name

Popular brands

Hitachi HUS VM, User And Reference Manual

Search results

Summary of Contents for HUS VM

Reviews:

Brands by name

Popular brands