manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 492

raidcom modify spm_ldev

Error message

Executing/

Async

Error code

Description

SSB1

SSB2

CMDRJE

Executing

2E22

9B04

The iSCSI name cannot be registered because the

number of iSCSI names that can be registered in

the system exceeded the maximum number.

CMDRJE

Executing

2E3F

8000

The specified operation is not supported in the

current microcode version.

CMDRJE

Executing

B9D3

B9D0

The operation cannot be performed because it is

locked in another session. Perform the operation

again.

CMDRJE

Executing

B9D3

B9D1

The Server Priority Manager information for the

port WWN already exists in the system.

CMDRJE

Executing

B9D3

B9D2

The LDEV cannot be registered because the

number of LDEVs that can be registered in the

system exceeded the maximum number.

CMDRJE

Executing

B9D3

B9D3

The WWN cannot be registered because the

number of WWNs that can be registered in the

system exceeded the maximum number.

CMDRJE

Executing

B9D3

B9D4

The WWN cannot be registered because the

number of WWNs that can be registered in the

LDEV exceeded the maximum number.

CMDRJE

Executing

B9D3

B9D5

The specified LDEV is not defined.

CMDRJE

Executing

B9D3

B9D7

Server Priority Manager is being used by Storage

Navigator or Device Manager - Storage Navigator.

CMDRJE

Executing

B9D3

B9D8

The iSCSI name cannot be registered because an

invalid WWN is registered. Invalid WWNs are

WWNs which are not in the WWN format defined

by IEEE. See 

Cautions about using Server Priority

Manager on page 5-63

 for details.

CMDRJE

Executing

B9D3

B9D9

The specified operation cannot be performed

because of no iSCSI package.

CMDRJE

Executing

B9D7

B9D7

The specified WWN, iSCSI name, or upper limit is

incorrect.

CMDRJE

Executing

B9D8

B9D8

The specified LDEV does not have the WWN or

iSCSI name.

CMDRJE

Executing

B9D9

B9D9

The Server Priority Manager program product is

not installed.

9-168

Troubleshooting

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands