manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 234

Note:

 For proper maintenance of TrueCopy operations, it is important to

determine if there are any faults in paired volumes, recover the volumes from

the failures as soon as possible, and continue operation in the original

system.

Note:

 For information about the operational requirements and specifications

for TrueCopy, please see the 

Hitachi TrueCopy® User Guide

 for your storage

system.

TrueCopy takeover commands

Figure 6-5 Server failover system configuration on page 6-10

 illustrates a

high-availability (HA) environment. When a server software error or a node

error is detected, the HA failover software causes the cluster manager (CM)

to monitor server programs and causes the CM of the standby node to

automatically activate the HA control script of the corresponding server

program. The HA control script usually contains database recovery

procedures, server program activation procedures, and other related recovery

procedures. The TrueCopy CCI takeover commands are also activated by the

HA control script.

Figure 6-5 Server failover system configuration

Legend

•

CM (Cluster Manager): Demon process that keeps the consistency of the

cluster by monitoring the node and server program in the cluster.

6-10

Data replication operations with CCI

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands