manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 240

the system operation with volume backups among UNIX servers and their

operating system management functions. The TrueCopy remote pair

commands are also used to copy volumes in server failover configurations

and to restore the volumes to their original state after a server failover has

been recovered.

•

Pair creation command: Creates a new volume pair. Volume pairs can be

created in units of volume or group.

•

Pair splitting command: Splits a volume pair and allows read and write

access to the secondary volume.

•

Pair resynchronization command: Resynchronizes a split volume pair

based on the primary volume. The primary volume remains accessible

during resynchronization.

¢

Swaps(p) option (TrueCopy only). Swaps volume from the S-VOL(P-

VOL) to the P-VOL(S-VOL) when the S-VOL(P-VOL) is in the

suspended state and resynchronizes the NEW_SVOL based on the

NEW_PVOL. At the result of this operation, the volume attributes of

the host of reference (local host) are used as the attributes for the

NEW_PVOL(SVOL).

•

Event waiting command: Used to wait for the completion of volume pair

creation or resynchronization and to check the pair status.

•

Pair status display and configuration confirmation command: Displays the

pair status and configuration of the volume pairs and is used for checking

the completion of pair creation or pair resynchronization.

Figure 6-7 TrueCopy remote system configuration

6-16

Data replication operations with CCI

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands