manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 276

If group (-g <group>) is specified, then the first dev_name on the specified

group is used.

Explanation of terms:

•

JNL Consistency Restore: commits up as far as MAX CTQ-Marker.

•

JNL Full Restore: commits up to EOM (End of marker for split).

•

JNL Consistency Suspend: suspends after "JNL Consistency Restore"

•

JNL Full Suspend: suspends after "JNL Full Restore"

Configuration examples

CCI does not change the command options for supporting Universal

Replicator MxN Open. However the output of the command is added so that

the command can display the consistency group and Q-Marker for each

storage system, because the consistency group and Q-Marker are managed

on each storage system.

6-52

Data replication operations with CCI

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands