Hitachi HF-W2000 50 Instruction Manual Download Page 188

Page: 188 / 290

8. MAINTENANCE OPERATIONS

8-5

(18) Bug check (blue screen) cause notifications

This feature detects a bug check (blue screen), and records the cause in the event log.

(19) Log information collection window

In this window you can use a graphical user interface to collect log data and memory dump files for this

equipment.

(20) Maintenance operation support commands

These commands include a command used for saving failure information, such as memory dump files and event

log files, to external media.

(21) Logging trends of the temperature inside the chassis

This feature periodically measures the temperature inside the chassis of this equipment and records the data in a

file.

Simulation

(22) Hardware status simulation

This feature simulates the hardware status of this equipment, including the fan status, drive status, and temperature

inside the chassis. You can use this feature to test user applications or check the notifications interface of the RAS

software without an actual hardware failure having occurred.

This manual explains the features in (13), (17), and (20). For details about other features, refer to the HF-W2000

Model 58/55/50 RAS FEATURES MANUAL. For more information about the POST message functionality of the

digital LEDs for status indications described in (8) under Status checks, see 9.6.1 POST messages.

Summary of Contents for HF-W2000 50



































































































































































































































































































Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands

Hitachi HF-W2000 50, Instruction Manual

Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands