Hitachi HF-W2000 50 Instruction Manual Download Page 273

Page: 273 / 290

10. SOFTWARE RAID1

10-30

10.6.4 Rebuilding feature

The rebuilding feature rebuilds RAID1. Rebuilding with the OS inactive can be completed earlier than rebuilding

with the OS running. Use this feature when you do not want to run the OS or to reduce maintenance time.

NOTE

• Before using this feature, complete other necessary work, such as replacing defective HDDs.

• Rebuilding is enabled only in a combination of an ONLINE drive and a NEW, INCOMPLETE DATA, or

REBUILD drive. In other states, rebuilding is disabled, and this feature cannot be selected in the menu window.

• If rebuilding is suspended for any reason after rebuilding has started, reuse the HDDs that are being rebuilt as

new HDDs by using the drive initialization feature. (See 10.6.7 Drive initialization feature.) If the equipment

restarts with rebuilding suspended, the equipment might not start, or HDD data might be lost.

• The rebuilding process takes about 90 minutes.

Use the rebuilding feature as follows:

1. Use the procedure described in 10.6.2(1) to display the Soft RAID Utility menu window.

Summary of Contents for HF-W2000 50



































































































































































































































































































Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands

Hitachi HF-W2000 50, Instruction Manual

Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands