Hitachi HF-W2000 50 Instruction Manual Download Page 3

Page: 3 / 290

Revision history

April 2020 (First Edition) WIN-62-0073 (out of print)

February 2021 (Second Edition) WIN-62-0073-01 (out of print)

March 2021 (Third Edition) WIN-62-0073-02 (out of print)

April 2021 (Fourth Edition) WIN-62-0073-03

Contact information

Information related to this product is provided through the following website.

In addition, use the following website to contact us about this product.

URL: https://www.hitachi-ip.com/products/hfw/

Trademarks

• Microsoft

Windows

, Windows Server

, Internet Explorer

, and Hyper-V

are registered trademarks of Microsoft

Corporation in the United States and other countries.

• Intel

, Xeon

, Intel Core

, and Celeron

are trademarks of Intel Corporation in the United States and other

countries.

• DisplayPort and DisplayPort Certified Logo are registered trademarks of the Video Electronics Standards

Association.

• Magic Packet

is a trademark or registered trademark of Advanced Micro Devices, Inc.

• All other product names of software and hardware described in this manual that are not from Hitachi are the

registered trademarks, trademarks, or products of their respective owners.

• Zlib is used as a built-in compression and decompression engine in part of the software for this product. Its copyright

notice is as follows:

Summary of Contents for HF-W2000 50



































































































































































































































































































Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands

Hitachi HF-W2000 50, Instruction Manual

Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands