Hitachi HF-W2000 50 Instruction Manual Download Page 63

Page: 63 / 290

2. OPERATION

2-2

2.2 Starting the Equipment

To start the equipment:

1. Plug the power cord into an outlet.

When the power cord is plugged into an outlet, the standby lamp (STBY) will turn on.

2. Turn on the power to the display.

3. Press the power switch. (See 1.5 Name and Function of Each Part.)

When the power is turned on, the standby lamp (STBY) turns off and the status lamp (STATUS) lights. The

status lamp turns red when the power is turned on and green when the OS starts and the equipment is operating.

4. After the OS starts, set up the equipment as described in 3.1 Setup Procedure When Turning On the Power for

the First Time. (This procedure is required only once, the first time you start the equipment after purchasing

the equipment.)

NOTE

• When RAS software is not installed or during the recovery process, the status lamp (STATUS) does not turn

green and remains red.

After these steps are complete, the equipment automatically performs the startup process until the sign-in screen

appears.

For information about controlling the power by using a LAN, see 2.7 Controlling the Power By Using a LAN.

Summary of Contents for HF-W2000 50



































































































































































































































































































Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands

Hitachi HF-W2000 50, Instruction Manual

Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands