Hitachi HF-W2000 50 Instruction Manual Download Page 107

Page: 107 / 290

3. SETUP

3-16

Enabling manual updates via Windows Update

If you do not want to automatically download and install update programs, you can set Windows Update to

manual updates by using the Local Group Policy Editor (

gpedit.msc

). The following describes the procedure

for setting Windows Update to manual updates.

1. Sign in to the computer as an administrator.

2. Right-click Start, and then click Run.

3. In the Run window, enter

gpedit.msc

to open the Local Group Policy Editor.

4. In the Local Group Policy Editor window, click Computer Configuration, Administrative Templates,

Windows components, Windows Update, and Configure Automatic Updates.

5. In the Configure Automatic Updates window, select Disabled, and then click OK.

Summary of Contents for HF-W2000 50



































































































































































































































































































Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands

Hitachi HF-W2000 50, Instruction Manual

Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands