Hitachi HF-W2000 50 Instruction Manual Download Page 31

Page: 31 / 290

C-6

3. Display Screens

Specifications

• Before setting up the screen, terminate all running application software.

• When you change the connections to switch between single- and multi-display configurations, turn off the power

to the equipment, change the connections of the display cables, turn the power back on, and then set up the screen

configuration.

• When you change the connection configuration for the displays, reconfigure the screen settings accordingly.

• Depending on the application software, the screen might flicker and video playback might not be smooth.

• The multi-streaming function of DisplayPort (daisy-chaining) is not supported.

• If a display connected via a DisplayPort connection is turned off, the display can no longer be detected.

Required actions

• If you want to enable Collage for multiple displays, use displays that support Display Data Channel (DDC). If you

are using displays that do not support DDC, you cannot enable Collage.

Summary of Contents for HF-W2000 50



































































































































































































































































































Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands

Hitachi HF-W2000 50, Instruction Manual

Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands