Hitachi HF-W2000 50 Instruction Manual Download Page 235

Page: 235 / 290

9. TROUBLESHOOTING

9-24

Table 9-3 Event log entries unique to the equipment (3/3)

No.

Event

Source

Type

Description

Action

2011

HFWRAS_SYS

Information Rebuilding of the RAID is

complete, but unreadable

sectors were detected on

the source drive (drive

bay %1). (Media error)

Read the description in 10.4.2 and take

action accordingly.

2012

HFWRAS_SYS

Error

Rebuilding of the RAID

failed due to an error on

the destination drive (drive

bay %1).

Read the description in 10.2.2 and build

a RAID again.

2019

HFWRAS_SYS

Information A media error occurred in

the RAID.

See 2.8.2 Note about media errors in the

HF-W2000 Model 58/55/50 RAS

FEATURES MANUAL and take action

accordingly.

2021

HFWRAS_SYS

Error

The drive on drive bay %1

is offline because of

mismatched data.

Read the description of 10.4.3 and take

action.

3000

HTsfRAID_SYS

Information The RAID status changed.

(ARRAY = %1, DRIVE1

= %2, DRIVE2 = %3)

No action required.

3001

HTsfRAID_SYS

Information The rebuilding process

stopped.

Reason: %1.

Read the description in 10.4.4 and take

action. If the error code is not written in

10.4.4, contact the system administrator

or maintenance personnel.

3010

HTsfRAID_SYS

Error

Service internal error.

Reason: %1.

Contact the system administrator or
maintenance personnel.

Summary of Contents for HF-W2000 50



































































































































































































































































































Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands

Hitachi HF-W2000 50, Instruction Manual

Search results

Summary of Contents for HF-W2000 50

Reviews:

Related manuals for HF-W2000 50

Brands by name

Popular brands