Hitachi G1000 User Manual Download Page 42

Page: 42 / 246

Item

Requirements and restrictions

•

The maximum size of a quorum disk is the maximum

limit for an external volume supported by Universal

Volume Manager: 4 TB.

•

One external volume group must be mapped to one

external volume.

•

Do not use a GAD quorum disk as a quorum disk for the

High Availability Manager function of the VSP, HUS VM,

or USP V/VM.

Alternate path software

Alternate path software is required for the single-server GAD

configuration and the cross-path GAD configuration (two

servers).
Refer to the Hitachi Data Systems interoperability matrix:

http://www.hds.com/products/interoperability

Cluster software

Cluster software is required for the server-cluster and cross-

path GAD configurations.
Refer to the Hitachi Data Systems interoperability matrix:

http://www.hds.com/products/interoperability

User interfaces

•

Command Suite : version 8.0.1 or later. HCS must be

connected to the primary and secondary storage

systems.

•

Command Control Interface: version 01-32-03/00 or

later. CCI must be installed on the host connected to the

primary and secondary storage systems. For details, see

the

Hitachi Command Control Interface Installation and

Configuration Guide.

The CCI command device is required on the primary and

secondary storage systems.

Interoperability requirements

This section describes the interoperability of global-active device (GAD) and

other Hitachi Virtual Storage Platform G1000 features.

Volume types that can be used for GAD

The following table lists the volume types on the Virtual Storage Platform

G1000 and specifies whether the volume can be used for GAD operations.

Volume type

Used as GAD P-

VOL?

Used as GAD S-

VOL?

Used as quorum

disk?

Dynamic Provisioning / Dynamic Tiering

Virtual volume

Yes

Pool volume

ShadowImage / Thin Image

P-VOL

Yes

2-4

System requirements

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands

Hitachi G1000, User Manual

Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands