Hitachi G1000 User Manual Download Page 135

Page: 135 / 246

From the

Actions

menu, select

Set up Global-Active Device

On the

Replication

tab,

General Tasks

, select

Set up Global-

Active Device

From

Configure Quorum Disks

, click

Select Volume

In the

Select Volume

window, select a

Storage system

to provide the

quorum disk, and then do one of the following:

From the

Available Volumes

list, select a volume, click

, and then

go to step 12.

If no suitable volume is listed, click

Create Volumes

. Optionally,

select

Advanced Options

to configure volume options or specify a

quorum disk label.

In the

Create Volumes

window, create a volume to be used as the

quorum disk.

From the

Volume Type

list select a volume type.

(Optional) Click

Advanced Options

to configure volume options or

specify a quorum disk label.

Click

Show Plan

and confirm that the information in the plan summary is

correct. If changes are required, click

Back

(Optional) Update the task name and provide a description.

(Optional) Expand

Schedule

to specify the task schedule.

You can schedule the task to run immediately or later. The default setting

Now

Click

Submit.

If the task is scheduled to run immediately, the process begins.

(Optional) Check the progress and result of the task on the

Tasks &

Alerts

tab. Click the task name to view details of the task.

From

Configure Quorum Disks

, for the primary storage, click

Virtualize Volumes

In the

Virtualize Volumes

dialog box:

Verify the external and internal storage systems are correct.

Click

Edit External Paths

to set or change external paths.

(Optional) Select

External Path Priority Settings

to increase or

decrease path priority.

Select

Internal Volume Configuration

and verify that

Change

Internal Volume(s) to Quorum Disk(s)

is selected by default. The

default ID is recommended, but can be changed to another value if

necessary.

Click

Show Plan

and submit the task.

Repeat steps 12 through 14 for the secondary storage system.
Note that for the secondary storage system, the secondary storage

system name will be displayed.

Using Hitachi Command Suite to set up global-active device

5-7

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Hitachi G1000, User Manual, Page: 135 / 246

Search results

Summary of Contents for G1000

Reviews: