Hitachi G1000 User Manual Download Page 24

Page: 24 / 246

For instructions on setting virtual IDs, see the

Hitachi Command Control

Interface Command Reference

Related topics

•

GAD and global storage virtualization on page 1-9

Monitoring GAD status

GAD operations are managed based on the following information:

•

Pair status

•

I/O mode of the P-VOL and S-VOL

•

GAD status, which is a combination of pair status and I/O mode

Related topics

•

GAD status on page 1-10

•

GAD status transitions on page 1-11

•

I/O modes on page 1-12

•

Relationship between GAD status, pair status, and I/O mode on page

1-13

•

Global-active device and server I/O on page 1-14

GAD status

The following table lists and describes the GAD statuses.

GAD status

Description

Data

redundancy

Updated

volume

Volume with

latest data*

Simplex

The volume is not a pair volume.

Not applicable

Mirroring

The pair is changing to Mirrored status.
This status is issued when you do the

following:
•

Prepare a quorum disk.

•

Copy data from the P-VOL to the

S-VOL.

P-VOL and S-

VOL

P-VOL

Mirrored

The pair is operating normally.

Yes

P-VOL and S-

VOL

P-VOL and S-

VOL

Suspended

The pair is suspended. I/O from the

server is sent to the volume with the

latest data.
When a failure occurs or the pair is

suspended, the status changes to

Suspended.

P-VOL or S-

VOL

P-VOL or S-

VOL

Blocked

I/O is not accepted by either pair

volume. This status occurs when:

None

P-VOL and S-

VOL

1-10

Overview of global-active device

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands

Hitachi G1000, User Manual

Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands