Hitachi G1000 User Manual Download Page 207

Page: 207 / 246

On the storage system at the primary site, suspend the GAD pairs by

specifying the primary volume.

pairsplit -g oraHA -r -IH0

Confirm that the pair status of P-VOLs of GAD pairs has changed to

PSUS(Local) and the pair status of the S-VOLs has changed to

SSUS(Block).

pairdisplay -g oraHA -fcxe -IH0

Power off the storage system at the secondary site.

Powering on the secondary storage system

Power on the storage system at the secondary site.

Confirm that the primary and secondary storage systems and the external

storage system for the quorum disk do not have any blocked parts.
If any parts are blocked, recover them.

Check for SIMs about path blockage, and delete the SIMs.

Confirm that the pair status of the P-VOLs of the GAD pairs is PSUS(Local)

and that the pair status of the S-VOLs is SSUS(Block).

pairdisplay -g oraHA -fcxe -IH0

On the storage system at the primary site, resynchronize the GAD pairs

by specifying the primary volume.

pairresync -g oraHA -IH0

Confirm that the pair status of the P-VOLs and S-VOLs of the GAD pairs

has changed to PAIR (Mirror (RL)).

pairdisplay -g oraHA -fcxe -IH0

Using the alternate path software, resume I/O from the servers to the

storage system at the secondary site.

Planned power off/on of the external storage system (I/O

at primary site)

Powering off the external storage system (I/O at primary site)

Direct server I/O to the storage system at the primary site.
Using the alternate path software, stop I/O from the servers to the

storage system at the secondary site.

On the storage system at the primary site, suspend the GAD pairs by

specifying the primary volume.

pairsplit -g oraHA -r -IH0

Confirm that the pair status of P-VOLs of the GAD pairs has changed to

PSUS(Local) and that the pair status of the S-VOLs has changed to

SSUS(Block).

pairdisplay -g oraHA -fcxe -IH0

On the primary and secondary storage systems, disconnect the quorum

disks.

Planned outage of global-active device storage systems

7-3

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands

Hitachi G1000, User Manual

Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands