Hitachi G1000 User Manual Download Page 206

Page: 206 / 246

Planned power off/on of the primary storage system

Powering off the primary storage system

Direct server I/O to the storage system at the secondary site.
Using the alternate path software, stop I/O from servers to the storage

system at the primary site.

On the storage system at the secondary site, suspend the GAD pairs to

change the pair status of the S-VOLs to SSWS (swap suspension).

pairsplit -g oraHA -RS -IH1

Verify that the pair status of P-VOLs of theGAD pairs has changed to

PSUS(Block) and that the pair status of the S-VOLs has changed to

SSWS(Local).

pairdisplay -g oraHA -fcxe -IH1

Power off the storage system at the primary site.

Powering on the primary storage system

Power on the storage system at the primary site.

Confirm that the primary and secondary storage systems and the external

storage system for the quorum disk do not have any blocked parts.
If any parts are blocked, recover them.

Check for SIMs about path blockage, and delete the SIMs.

Confirm that the pair status of the GAD P-VOLs is PSUS(Block) and that

the pair status of the S-VOLs is SSWS(Local).

pairdisplay -g oraHA -fcxe -IH1

On the storage system at the secondary site, resynchronize the GAD pairs

by reversing the primary and secondary volumes (swap resync).

pairresync -g oraHA -swaps -IH1

Confirm that the pair status of the P-VOLs and S-VOLs of the GAD pairs

has changed to PAIR (Mirror (RL)).

pairdisplay -g oraHA -fcxe -IH1

Using the alternate path software, resume I/O from the servers to the

storage system at the primary site.

If necessary, reverse the primary and secondary volumes.

Planned power off/on of the secondary storage system

Powering off the secondary storage system

Direct server I/O to the storage system at the primary site.
Using the alternate path software, stop I/O from servers to the storage

system at the secondary site.

7-2

Planned outage of global-active device storage systems

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands

Hitachi G1000, User Manual

Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands