Hitachi G1000 User Manual Download Page 132

Page: 132 / 246

Prerequisites for global-active device setup using HCS

Before performing global-active device setup tasks using HCS, ensure the

following prerequisites are met:

•

The Virtual Storage Platform G1000 microcode version for both the

primary and secondary storage systems must be

80-02-01-XX/XX

or later

to create global-active device pairs where the P-VOLs already have a

virtual LDEV ID assigned and are managed by user-defined virtual storage

machines, as with Nondisruptive Migration. This requirement is not

necessary for global-active device pairs created by adding secondary

storage resources to the primary storage default virtual storage machine.

•

Global-active device has been licensed (which includes Replication

Manager).

•

Replication Manager is installed and linked to HCS.

•

A pair management server is installed with Device Manager Agent and

Command Control Interface (CCI) at the primary and secondary storage

sites.

•

The external port of the primary and secondary storage systems are

connected to the external (quorum) storage system by Fibre Channel or

Fibre Channel over Ethernet.

•

You have registered (discovered) the primary, secondary, and external

storage systems using HCS.

Related topics

•

About global-active device setup on page 5-2

Select primary and secondary storage systems

Select primary and secondary storage systems listed by the global-active

device setup. Only valid storage systems with the correct firmware revision

are listed.

Procedure

Open the global-active device setup window:

From the

Actions

menu, select

Set up Global-Active Device

On the

Replication

tab,

General Tasks

, select

Set up Global-

Active Device

On the

Set up Global-Active Device

window, click

Select Storage

Systems

From the

Select Storage Systems

window, select the primary storage

system from the list of available storage systems.

Select the secondary storage system from the list of available storage

systems.

5-4

Using Hitachi Command Suite to set up global-active device

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands

Hitachi G1000, User Manual

Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands