Hitachi G1000 User Manual Download Page 149

Page: 149 / 246

Prerequisites

•

Identify the name of the target host, and the global-active device primary

or secondary volume to unallocate.

•

If necessary, backup data for the target volume.

Procedure

On the

Resources

tab, select a host OS, then select a host using global-

active device volumes, and click

Unallocate Volumes

Tip:

If you select specific volumes for the host,

Unallocate Volumes

will

go directly to the

Show Plan

window.

In the

Unallocate Volumes

dialog box, verify that the host is correct,

and then select the P-VOL or S-VOL of the global-active device pair to

unallocate.

Note:

When unallocating the secondary volume, the primary volume is

retained as a normal volume. When unallocating the primary volume, the

secondary volume is retained as a normal volume.

Click

Show Plan

and confirm that the information in the plan summary is

correct. If changes are required, click

Back

(Optional) Update the task name and provide a description.

(Optional) Expand

Schedule

to specify the task schedule.

You can schedule the task to run immediately or later. The default setting

Now

. If the task is scheduled to run immediately, you can select

View

task status

to monitor the task after it is submitted.

Click

Submit.

If the task is scheduled to run immediately, the process begins.

(Optional) Check the progress and result of the task on the

Tasks &

Alerts

tab. Click the task name to view details of the task.

Result

Unallocated global-active device primary or secondary volumes are added

back to the storage system

Open-Unallocated

volume list.

Related topics

•

Unallocating global-active device pairs on page 5-19

•

Discontinuing a global-active device environment on page 5-23

Recovering from global-active device failures

This module provides an overview of global-active device failures, where to

find detailed information, and specific tasks that can be performed from HCS.

Using Hitachi Command Suite to set up global-active device

5-21

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands

Hitachi G1000, User Manual

Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands