Hitachi G1000 User Manual Download Page 224

Page: 224 / 246

Remote path

status and

description

Status description

Recommended action

Cables

Switches (zoning settings)

Channel extenders (if

channel extenders are

connected)

Lines and systems

connected among between

channel extenders (if

channel extenders are

connected)

Port Rejected
Insufficient

resources

All resources of the local storage

system or remote storage system

are being used for other

connections. Therefore, the local

storage system or remote storage

system rejected the connection

control function that sets remote

paths.

•

In the Remove Remote Paths

window, remove all remote

paths that are not currently

used.

•

In the Remove Remote

Connections window, remove

all remote storage systems

that are not currently used.

•

Confirm that the port attribute

of the local storage system is

Initiator, and that the port

attribute of the remote storage

system is set to RCU Target is

set. If these settings are

incorrect, change them to the

correct port attributes.

Serial Number

Mismatch
Mismatched

serial number

The serial number of the remote

storage system does not match

the specified serial number.

Check the following, and correct

them if they are not correct:
•

The serial number (S/N) and

system ID of the remote

storage system, the port

number of the local storage

system, and the port number

of the remote storage system

are correct.

•

The topology (Fabric, FC-AL,

Point-to-point) of the ports of

the local storage system and

remote storage system is

correctly set.

•

The following network relaying

devices are correctly

configured, and can be

properly used:

Connectors

Cables

Switches (zoning settings)

Channel extenders (if

channel extenders are

connected)

9-4

Troubleshooting

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands

Hitachi G1000, User Manual

Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands