Hitachi G1000 User Manual Download Page 208

Page: 208 / 246

raidcom disconnect external_grp -ldev_id 0x999 -IH0

Note:

When you disconnect a quorum disk, SIM (DEF0ZZ*) (quorum disk

blockade) might be issued. If this SIM is issued, delete the SIM after

powering on the storage system and reconnecting the quorum disk.
*ZZ: quorum disk ID

On the primary and secondary storage systems, confirm that the quorum

disk has been disconnected.

raidcom get path -path_grp 1 -IH0

Power off the external storage system.

Powering on the external storage system (I/O at primary site)

Power on the external storage system.

Confirm that the primary and secondary storage systems and the external

storage system for the quorum disk do not have any blocked parts.
If any parts are blocked, recover them.

Check for SIMs about path blockage, and delete the SIMs.

On the primary and secondary storage systems, establish the connections

to the quorum disks.

raidcom check_ext_storage external_grp -ldev_id 0x9999 -IH0

On the primary and secondary storage systems, confirm that the

connections to the quorum disks have been established.

raidcom get external_grp -external_grp_id 1-1 -IH0

Confirm that the external volumes of the primary and secondary storage

systems are recognized as quorum disks.

raidcom get ldev -ldev_id 0x9999 -IH0

Check for SIMs about quorum disk blockade, and delete the SIMs.

Confirm that the pair status of the P-VOLs of the GAD pairs is PSUS(Local)

and that the pair status of the S-VOLs is SSUS(Block).

pairdisplay -g oraHA -fcxe -IH0

Wait for more than 5 minutes after completing step 4, and then

resynchronize the GAD pairs on the primary storage system by specifying

the primary volume.

pairresync -g oraHA -IH0

Confirm that the pair status of the P-VOLs and S-VOLs of the GAD pairs

has changed to PAIR (Mirror (RL)).

pairdisplay -g oraHA -fcxe -IH0

Using the alternate path software, resume server I/O to the storage

system at the secondary site.

7-4

Planned outage of global-active device storage systems

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands

Hitachi G1000, User Manual

Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands