The following figure depicts the setup window configuration items in the
global-active device environment:
•
Select Storage Systems (see below). This task must be done first.
The following setup tasks can be performed in any order, but must be
completed before you can allocate global-active device pairs.
•
Configure Remote Paths (see )
•
Configure Quorum Disks (see )
•
Configure Pair Management Servers (see )
•
Configure Virtual Storage Machines (see )
Related topics
•
Prerequisites for global-active device setup using HCS on page 5-4
•
Select primary and secondary storage systems on page 5-4
•
Configuring remote paths on page 5-5
•
Configuring the quorum disk on page 5-6
•
Configuring pair management servers on page 5-8
•
Configuring the virtual storage machine on page 5-9
Using Hitachi Command Suite to set up global-active device
5-3
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide
Summary of Contents for G1000
Page 8: ...Index viii Hitachi Virtual Storage Platform G1000 Global Active Device User Guide ...
Page 14: ...xiv Preface Hitachi Virtual Storage Platform G1000 Global Active Device User Guide ...
Page 238: ...9 18 Troubleshooting Hitachi Virtual Storage Platform G1000 Global Active Device User Guide ...
Page 245: ...Hitachi Virtual Storage Platform G1000 Global Active Device User Guide ...