Hitachi G1000 User Manual Download Page 146

Page: 146 / 246

Related topics

•

Checking global-active device pair status on page 5-16

Monitoring global-active device pair performance

Tuning Manager will collect and display performance information for global-

active device pairs. If an administrator suspects a performance problem, or

receives an alert indicating a performance problem, the administrator can

investigate and resolve the issue.

Because global-active device pairs are kept synchronized, I/O issues on either

the primary or secondary storage system can impact host performance.

Status information and I/O metrics related to P-VOL and S-VOL performance

can be examined to identify the problem, and resolve host I/O issues.

Prerequisites

•

Tuning Manager must be installed, licensed and configured.

•

When selecting one member of a global-active device pair, a single Device

Manager managing the pair is required for analyzing the performance of

the P-VOL and S-VOL simultaneously.

Procedure

On the

Analytics

tab, open the

Hosts

tree, select a host OS, and then

select the target host as follows:

Select the radio button next to the target host name, and then click

Identify Performance Problems

Click

Host Name

to select target host volumes, and then click

Identify Performance Problems

Tip:

When you select volumes from a host volume list or from within the

Identify Performance Problems

wizard, if you select a global-active

device volume in a single Device Manager environment, the P-VOL and S-

VOL will both be targets for analysis. To identify global-active device

volumes, use

Column Settings

to include

Copy Info (P-VOL)

Copy

Info (S-VOL)

GAD Pair Status

, and

Virtual LDEV ID

in the host

volume list or the Identify Performance Problems wizard.
The

Identify Performance Problems

wizard is displayed (starting on

the Introduction page). Review displayed messages.

Click

Next

On the

Target Selection

page:

If prompted, select the

Storage system type/volume type

(location)

, for example VSP G1000 and HDP volumes.

Click

List of added volumes

to view analysis targets, including

global-active device volumes.

5-18

Using Hitachi Command Suite to set up global-active device

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands

Hitachi G1000, User Manual

Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands