manualshive.com logo in svg

Hitachi G1000, User Manual

The Huawei G1000 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information about the features and functions of the Huawei G1000 smartphone. Enhance your user experience by accessing the manual at manualshive.com.

Share
Download
background image

Requirements and restrictions

The following table lists the requirements and restrictions for global-active

device operations.

Item

Requirements and restrictions

Storage systems at the

primary and secondary

sites

•

Model.

 Virtual Storage Platform G1000 is required at the

primary and secondary sites.

•

Microcode.

 Microcode (DKCMAIN) version

80-01-4x-00/00 or later is required on the primary and

secondary systems.

•

Global-active device.

 The GAD feature must be

installed and enabled on the primary and secondary

systems.

•

Controller emulation type.

 The controller emulation

type of the primary and secondary systems must be

same.

•

Shared memory.

 Additional shared memory is required

in the primary and secondary storage systems.

External storage system

(for quorum disk)

•

The storage system must be supported for attachment to

the VSP G1000 using Universal Volume Manager.
For details, see the 

Hitachi Universal Volume Manager

User Guide.

•

The maximum distance between the external storage

system and the primary site and secondary site is 1,500

km.

Licensed capacity

The licensed capacity is restricted as follows:
•

The page size assigned to the virtual volume is counted

as a licensed capacity for GAD.

•

If the actual licensed capacity exceeds the available

licensed capacity, GAD can be used as usual for 30 days.

After 30 days, only pair split and pair delete operations

are allowed.

Host server platforms

Refer to the Hitachi Data Systems interoperability matrix:

http://www.hds.com/products/interoperability

Physical paths connecting

the primary and

secondary storage

systems

•

A maximum of 8 physical paths is supported.

•

The 16FC8 package is required for the ports that connect

the primary and secondary storage systems.

•

The ports that connect the primary and secondary

storage systems must be configured as Initiator ports

and RCU target ports.

•

The maximum distance between the primary and

secondary storage systems is 1,000 km.

•

Fibre-channel interface is required.

Remote paths and path

groups

•

A maximum of 8 remote paths can be registered in a

path group.

•

A maximum of 64 path groups can be set in a storage

system (sum of the path groups used by TrueCopy,

Universal Replicator, and Universal Replicator for

Mainframe).

2-2

System requirements

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Reviews:

No comments

Related manuals for G1000

D-Link DI-106 Series Faq preview
DI-106 Series
Brand: D-Link Pages: 29
D-Link DGS-3700 Series User Manual preview
DGS-3700 Series
Brand: D-Link Pages: 292
D-Link DGS-3224SR User Manual preview
DGS-3224SR
Brand: D-Link Pages: 140
D-Link DGS-1224T - Web Smart Switch User Manual preview
DGS-1224T - Web Smart Switch
Brand: D-Link Pages: 61
D-Link DI-LB604 - Load Balancing Router Quick Installation Manual preview
DI-LB604 - Load Balancing Router
Brand: D-Link Pages: 14
D-Link DIR-605L Specification preview
DIR-605L
Brand: D-Link Pages: 2
D-Link DIR-510L Manual preview
DIR-510L
Brand: D-Link Pages: 45
D-Link DES-3550 Manual preview
DES-3550
Brand: D-Link Pages: 218
D-Link DES-3528 - xStack Switch - Stackable User Manual preview
DES-3528 - xStack Switch - Stackable
Brand: D-Link Pages: 322
D-Link DIR-130 - Broadband VPN Router How To Set Up preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 10
D-Link DIR-130 - Broadband VPN Router Troubleshooting Manual preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 4
D-Link DIR-130 - Broadband VPN Router Configuration preview
DIR-130 - Broadband VPN Router
Brand: D-Link Pages: 13
D-Link DIR Series Configuration Manual preview
DIR Series
Brand: D-Link Pages: 13
D-Link DI-804HV - Express ENwork Router Configuration Manual preview
DI-804HV - Express ENwork Router
Brand: D-Link Pages: 19
D-Link DI-808HV Quick Installation Manual preview
DI-808HV
Brand: D-Link Pages: 12
D-Link DI-804 Quick Install Manual preview
DI-804
Brand: D-Link Pages: 8
D-Link DI-604UP Quick Install Manual preview
DI-604UP
Brand: D-Link Pages: 16
D-Link DI-304 Technical Bulletin preview
DI-304
Brand: D-Link Pages: 7

Brands by name

Popular brands

Load more brands