Only valid storage and virtual storage machine information is
displayed. If volume type is HDP, select the
Volume location
. If
volume type is HDT, the
Volume Selection
options are displayed.
You cannot allocate Basic volumes.
b
.
Click
Advanced Options
for further configuration.
c
.
In
LUN Path Options
:
Edit LUN paths from primary storage ports to hosts.
d
.
Click
Host Group and LUN settings
for further configuration.
e
.
In
Pair Management Server Settings
:
Select an available host as the pair management server. For Instance
ID, click
Existing
to use a current configuration definition file and
related instance ID number on the pair management server, or click
New
to create a new configuration definition file, and enter a new
instance ID number which will be validated as an available instance
ID. You can also specify a
UDP Port
number for the instance.
4
.
On the
Secondary
tab, configure the following options:
a
.
Select the secondary
Storage system
,
Virtual Storage Machine
,
and
Volume type
(HDP or HDT):
Virtual storage machine information defaults to the primary tab value.
b
.
In
Advanced Options
:
Unlike the Primary tab, select HDP pools for the secondary storage
system (Pools for S-VOL) that correspond to the HDP pools configured
on the primary tab (Pools for P-VOL). For example, automatic
selection of HDP volumes will display primary HDP pools, and eligible
secondary HDP pools for volume allocation. You can examine primary
tab HDP pool and volume details with links. You can accept the HDP
pools selected for secondary volumes, or make a manual selection by
clicking
Select Pool
to list and select eligible HDP pools, and selecting
eligible volumes from the HDP pools.
c
.
In
LUN Path options
:
Edit LUN paths from secondary storage ports to hosts.
LUN Path
Setting Information on Primary Site
lists the primary storage
system, and No. of LUN Paths per volume. Click the link to display
primary storage system mapping information.
d
.
Click
Host Group and LUN settings
for further configuration.
e
.
Click
Pair Management Server Settings
for further configuration.
5
.
Click
Virtual ID Settings
for further configuration.
These settings display only when options other than the default virtual
storage machine are used on the primary storage.
6
.
In
Pair Settings
:
Select the
Quorum Disk
, select new or existing in the
Copy Group
for
management purposes, and then manually enter a name (Prefix and Start
Sequence No.) or select Automatic for
Pair Name
and a name will be
created.
7
.
Click
Show Plan
and confirm that the information in the plan summary is
correct. If changes are required, click
Back
.
Using Hitachi Command Suite to set up global-active device
5-13
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide
Summary of Contents for G1000
Page 8: ...Index viii Hitachi Virtual Storage Platform G1000 Global Active Device User Guide ...
Page 14: ...xiv Preface Hitachi Virtual Storage Platform G1000 Global Active Device User Guide ...
Page 238: ...9 18 Troubleshooting Hitachi Virtual Storage Platform G1000 Global Active Device User Guide ...
Page 245: ...Hitachi Virtual Storage Platform G1000 Global Active Device User Guide ...