Hitachi G1000 User Manual Download Page 152

Page: 152 / 246

storage system) and unvirtualize the external volume (quorum disk).

Be sure to perform this for both the primary and secondary storage.

Delete the command devices for global-active device pair management

servers.

In the

Unallocate Volumes

dialog box, unallocate the pair

management server and the command device.

On the

Resources

tab, in the

Storage Systems

tree, select the

primary or secondary storage system, and select

Volumes

. In the

application area, click the

System GUI

link.

From the volume list (LDEVs) that appear, select the command device

that you want to delete.

Tip:

Look for

Command Device

in the

Attribute

column.

From

More Actions

, select

Edit Command Devices

and in the

dialog box that appears, delete the command device.

Delete the global-active device virtual storage machine and remove the

secondary storage system resources from the global-active device virtual

storage machine.

Note:

Before removing secondary storage system resources, you must

unallocate the volumes on the global-active device virtual storage

machine.

On the

Administration

tab, select

Virtual Storage Machine

Select the virtual storage machine related to global-active device pairs

and click

Edit Virtual Storage Machine

In the

Edit Virtual Storage Machine

window, select the secondary

storage system, and then select

Remove Storage Systems

Result

The global-active device environment no longer exists.

Related topics

•

Unallocating global-active device pairs on page 5-19

•

Unallocating individual global-active device volumes on page 5-20

5-24

Using Hitachi Command Suite to set up global-active device

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Hitachi G1000, User Manual, Page: 152 / 246

Search results

Summary of Contents for G1000

Reviews: